
Information
Everything you need to know
Chemical spill kit in a yellow carry bag: absorbent pillows, socks and pads for acids, bases, solvents, oils and water-based liquids. Two sizes: Kit 13 L and Kit 21 L.
- Everything in one bag, ready to carry to the spill: contain with the sock, soak up with the pillows and pads, and bag the used absorbent.
- Absorption stated per piece according to the manufacturer's data sheet (BS 7959-1, tolerance ±5 %), not a rounded-up kit name.
- Both kits come with a free “Spill Kit Station” sign (in English) to mark where the kit is kept. The pieces are packed separately in a box for easy transport.
Kit 13 L
| Contents | Absorbs |
|---|---|
| 1 × absorbent pillow 30 × 30 × 5 cm | 2.3 L |
| 1 × absorbent sock Ø 8 × 120 cm | 3.6 L |
| 20 × absorbent pad 40 × 50 cm, Standard | 7.3 L |
- 1 pair of nitrile gloves EN ISO 374-1
- 1 waste bag with 2 cable ties
- 1 pair of safety goggles EN 166
- Free gift: 1 × “Spill Kit Station” sign 20 × 20 cm, in English (foamed PVC, 3 mm), can be stuck on the wall with double-sided tape
- Yellow carry bag 40 × 40 × 15 cm, with the instructions printed on the back
- Supplied unassembled: the pieces come packed separately in a cardboard box, for easy transport
Total: up to 13.2 L
Kit 21 L
| Contents | Absorbs |
|---|---|
| 2 × absorbent sock Ø 8 × 120 cm | 7.2 L |
| 40 × absorbent pad 40 × 50 cm, Standard | 14.6 L |
- 2 pairs of nitrile gloves EN ISO 374-1
- 2 waste bags, each with 2 cable ties
- 1 pair of safety goggles EN 166
- Free gift: 1 × “Spill Kit Station” sign 20 × 20 cm, in English (foamed PVC, 3 mm), can be stuck on the wall with double-sided tape
- Yellow carry bag 40 × 40 × 15 cm, with the instructions printed on the back
- Supplied unassembled: the pieces come packed separately in a cardboard box, for easy transport
Total: up to 21.8 L
Chemical range (yellow)
100 % polypropylene, hydrophilic and oleophilic: it absorbs water-based and oil-based liquids, including acids and bases. Yellow identifies the chemical range.
Before you use it
- Check in the safety data sheet (SDS) of the spilled substance that polypropylene is compatible with it.
- Do not use on hot surfaces: polypropylene melts at 160–175 °C.
- Used absorbent takes on the hazards of the liquid it absorbed. Dispose of it as waste according to the SDS and local rules (when contaminated with hazardous substances, typically EWC code 15 02 02*).
- For a large or unknown spill, move away and call 112.
This product is an aid for the person in charge of the response: it does not replace the risk assessment, the company procedure or training.
-
Shipping calculated by weight Full cost shown at checkout
-
Dispatched in 1–2 business days Peninsular Spain & Portugal: 2–4 days total
-
Urgent orders Talk to us before you order
-
UN-certified packaging Tested and approved for ADR / IMDG transport